A
- ACLs, Access Control Lists in Linux-ACL Support in Applications
- access, Definitions, A Directory with Access ACL
- check algorithm, The ACL Check Algorithm
- default, Definitions, A Directory with a Default ACL
- definitions, Definitions
- effects, Effects of a Default ACL
- handling, Handling ACLs
- masks, A Directory with Access ACL
- permission bits, ACL Entries and File Mode Permission Bits
- structure, Structure of ACL Entries
- support, ACL Support in Applications
- ACPI
- disabling, The Boot Screen
- addresses
- IP, IP Addresses and Routing
- MAC, IP Addresses
- ADSL
- configuring, Configuring an ADSL or T-DSL Connection-DSL Connection by Dial-on-Demand
- dial-on-demand, DSL Connection by Dial-on-Demand
- Apache, From 8.0 to 8.1, The Apache Web Server-Additional Sources
- apxs, Installing Modules with apxs
- CGI, Common Gateway Interface
- configuring, Configuration-UserDir
- content negotiation, Apache Modules
- default page, Automatic Display of a Default Page
- DocumentRoot, DocumentRoot
- flags, Flags
- installing, Installation-Installing Modules with apxs
- logging, LogLevel, Using Apache
- modules, Apache Modules
- activating, Modules
- loading, LoadModule
- mod_perl, mod_perl
- mod_php4, mod_php4
- mod_python, mod_python
- mod_ruby, mod_ruby
- permissions, Directory, Access Permissions
- security, Security-Staying Updated
- Squid, Setup
- SSI, Server-Side Includes, Server Side Includes
- starting, Activating Apache
- threads, Threads
- troubleshooting, Troubleshooting
- virtual hosts, Apache Modules, Virtual Hosts-Multiple Instances of Apache
- authentication
- PAM, PAM — Pluggable Authentication Modules-For More Information
B
- backups, Backup
- creating with YaST, Backup Copy of the System Areas
- restoring, Restoring the System
- Bash
- .bashrc, The Package bash and /etc/profile
- .profile, The Package bash and /etc/profile
- profile, The Package bash and /etc/profile
- BIND, Starting the Name Server BIND-Structure of Zone Files
- BIOS
- boot sequence, Possible Problems when Booting the System
- virus protection, Starting SUSE LINUX
- Bluetooth, Wireless Communication, Bluetooth
- hciconfig, hciconfig
- hcitool, hcitool
- network, Configuring Bluetooth with YaST
- opd, Data Transfer from a Mobile Phone to the Computer
- pand, Network Connection between Two Hosts
- sdptool, sdptool
- boot disks, Boot Management
- CDs, Boot Management
- creating
- DOS, Creating a Boot Disk in DOS
- creating with dd, Creating a Boot Disk in a UNIX-Type System
- creating with rawrite, Creating a Boot Disk with rawrite
- booting, The SUSE LINUX Boot Concept, Manual Page of reiserfsck, Manual Page of e2fsck
- boot loaders, Boot Loaders
- boot managers, Boot Management
- boot sectors, Master Boot Record, Boot Sectors
- CD, from, Possible Problems when Booting the System
- CD 2, from, Booting from a Floppy Disk (SYSLINUX)
- configuring, Boot Configuration
- YaST, Configuring the Boot Loader with YaST-Boot Loader Configuration Options
- DOS, Booting DOS or Windows
- floppy disks, from, Creating a Boot Disk in DOS, Booting from a Floppy Disk (SYSLINUX)
- graphic, The Graphical SUSE Screen
- disabling, The Graphical SUSE Screen
- GRUB, Starting SUSE LINUX, Booting and Boot Managers, Booting with GRUB-For More Information
- initrd, Booting with the Initial RAM Disk-Prospects
- creating, Creating an initrd
- LILO, Starting SUSE LINUX
- linuxrc, linuxrc
- loader, Boot Loader Configuration Options
- locations for, Boot Loader Configuration Options
- log, Boot Log
- management, Boot Management
- methods, Starting SUSE LINUX
- process, The Boot Process
- system freezes, Starting SUSE LINUX
- USB sticks, Boot Management
- Windows, Booting DOS or Windows
C
- cards
- graphics, Graphics Card
- drivers, Device Section
- network, Configuring the Network Card with YaST
- testing, Requirements
- radio, TV and Radio Cards
- sound, Sound
- TV, TV and Radio Cards
- CD-ROM drives
- ATAPI, ATAPI CD-ROM Hangs while Reading
- supported, Supported CD-ROM Drives
- CDs
- booting from, Possible Problems when Booting the System, Boot Management
- cellular phones, Cellular Phones and PDAs
- chown, Shell Tools Compatible with POSIX Standard of 2001
- CJK, Keyboard Mapping
- coldplug, The Boot Scripts Coldplug and Hotplug
- commands
- chown, Shell Tools Compatible with POSIX Standard of 2001
- e2fsck, Manual Page of e2fsck
- fonts-config, Installing and Configuring Fonts
- free, The free Command
- getfacl, A Directory with Access ACL
- grub, Booting with GRUB
- head, Shell Tools Compatible with POSIX Standard of 2001
- hotplug, Hotplug Events
- hwinfo, Automatic Module Loading
- ldapadd, Inserting Data into an LDAP Directory
- ldapdelete, Deleting Data from an LDAP Directory
- ldapmodify, Modifying Data in the LDAP Directory
- ldapsearch, Searching or Reading Data from an LDAP Directory
- lp, Configuration for Applications
- nice, Shell Tools Compatible with POSIX Standard of 2001
- rpm, RPM — the Package Manager
- rpmbuild, RPM — the Package Manager
- scp, scp — Secure Copy
- setfacl, A Directory with Access ACL
- sftp, sftp — Secure File Transfer
- slptool, SLP Front-Ends in SUSE LINUX
- smbpasswd, Samba as Login Server
- sort, Shell Tools Compatible with POSIX Standard of 2001
- ssh, The ssh Program
- ssh-agent, SSH Authentication Mechanisms
- ssh-keygen, SSH Authentication Mechanisms
- tail, Shell Tools Compatible with POSIX Standard of 2001
- udev, Dynamic Device Nodes with udev
- configuration files, Configuration Files
- .bashrc, The Package bash and /etc/profile, The Command ulimit
- .emacs, Settings for GNU Emacs
- .mailsync, Configuration and Use
- .profile, The Package bash and /etc/profile
- .xsession, SSH Authentication Mechanisms
- acpi, ACPI in Action
- apache2, Configuration with SuSEconfig
- asound.conf, Sound Configuration
- config, Kernel Configuration
- crontab, The cron Package
- csh.cshrc, Some Examples
- dhclient.conf, DHCP Software Packages
- dhcp, /etc/sysconfig/network/config, dhcp, wireless
- dhcpd.conf, The DHCP Server dhcpd
- exports, Exporting File Systems Manually, Firewall Configuration with SuSEfirewall2
- foomatic/filter.conf, From 8.2 to 9.0
- fstab, More Partitioning Tips, LVM Configuration, Accessing Your Normal System
- group, Checking passwd and group in /etc
- grub.conf, The File /etc/grub.conf
- gshadow, /etc/gshadow Obsolete
- host.conf, /etc/host.conf
- alert, /etc/host.conf
- multi, /etc/host.conf
- nospoof, /etc/host.conf
- order, /etc/host.conf
- trim, /etc/host.conf
- HOSTNAME, /etc/HOSTNAME
- hosts, Domain Name System,
/etc/hosts
- hotplug, The Hotplug System
- httpd.conf, Configuration, Manual Configuration
- hwinfo, Automatic Module Loading
- hwup, Hotplug Agents
- ifcfg-*, /etc/sysconfig/network/ifcfg-*
- inittab, Virtual Consoles, The init Program, Runlevels, Changing Runlevels
- inputrc, Keyboard Mapping
- irda, Configuration
- kernel, Creating an initrd
- language, Language and Country-Specific Settings, Some Examples
- lilo.conf, Boot Loaders
- logrotate.conf, Configuration
- menu.lst, The GRUB Boot Menu, Boot Loaders
- modprobe.conf, Sound Configuration, Upgrading to Kernel 2.6, Handling Modules, /etc/modprobe.conf-/etc/modprobe.conf
- modules.conf, Upgrading to Kernel 2.6
- modules.dep, Handling Modules
- named.conf, Starting the Name Server BIND, The Configuration File /etc/named.conf-Structure of Zone Files, Local DNS Server
- network, /etc/sysconfig/network/config, dhcp, wireless
- providers, Configuring an ADSL or T-DSL Connection
- networks, /etc/networks
- nscd.conf, /etc/nscd.conf
- nsswitch.conf, /etc/nsswitch.conf, Standard Procedure
- pam_unix2.conf, Standard Procedure
- passwd, Checking passwd and group in /etc
- permissions, Some General Security Tips and Tricks
- powersave, ACPI in Action
- powersave.conf, Changes in the powersave Package
- profile, The Package bash and /etc/profile, The Command ulimit, Some Examples
- rc.config, SuSEconfig and /etc/sysconfig
- resolv.conf, The File /etc/resolv.conf, /etc/resolv.conf, Starting the Name Server BIND, Starting Squid
- routes, Routing in SUSE LINUX
- samba, Security Levels
- services, Security Levels
- slapd.conf, Server Configuration with slapd.conf
- smb.conf, Samba, Configuring the Server
- smppd.conf, Configuring smpppd
- smpppd-c.conf, Configuring kinternet,
cinternet, and
qinternet for Remote Use
- squid.conf, Commands for Starting and Stopping Squid, The Configuration File /etc/squid/squid.conf, Options for Access Controls, Configuration Options in /etc/squid/squid.conf, Cache Manager ACLs in /etc/squid/squid.conf, squidGuard
- squidguard.conf, squidGuard
- sshd_config, X, Authentication, and Forwarding Mechanisms
- suseconfig, SuSEconfig and /etc/sysconfig
- sysconfig, Sysconfig Editor, SuSEconfig and /etc/sysconfig-SuSEconfig and /etc/sysconfig
- syslinux.cfg, Boot Loaders
- termcap, Keyboard Mapping
- wireless, /etc/sysconfig/network/config, dhcp, wireless
- XF86Config, Optimizing the X Configuration
- Device, Device Section
- Monitor, Monitor and Modes Section
- Screen, Screen Section
- xml/catalog, From 8.2 to 9.0
- xml/suse-catalog.xml, From 8.2 to 9.0
- configuring, SuSEconfig and /etc/sysconfig
- Apache, Configuration-UserDir
- cable modem, Cable Modem
- CD-ROM, CD-ROM and DVD Drives
- DNS, Host Name and DNS, DNS — Domain Name System
- DSL, DSL
- e-mail, Mail Transfer Agent
- firewalls, Firewall
- graphics cards, Graphics Card
- groups, Group Administration
- GRUB, Booting with GRUB, The File /etc/grub.conf
- hard disk controllers, Hard Disk Controller
- hard disks
- DMA, IDE DMA Mode
- hardware, Hardware-TV and Radio Cards
- IPv6, Configuring IPv6
- IrDA, Configuration
- ISDN, ISDN
- joysticks, Joystick
- keyboard, Keyboard Layout Selection
- language, Language Selection
- laptops, Configuration-For More Information
- modems, Modem
- mouse, Mouse
- networks, Network Devices-Configuring Samba Servers and Clients, Configuring the Network Card with YaST
- manually, Manual Network Configuration-Routing in SUSE LINUX
- NFS, NFS Client and NFS Server
- NTP
- client, NTP Client
- printing, Printer-For More Information
- radio, TV and Radio Cards
- routing, Routing, Routing in SUSE LINUX
- Samba, Configuring the Server
- clients, Configuring Samba Servers and Clients, Configuring a Samba Client with YaST
- servers, Configuring Samba Servers and Clients
- scanner, Scanner
- security, Security and Users-Firewall
- software, Software-Update Options
- sound cards, Sound
- Squid, The Configuration File /etc/squid/squid.conf
- SSH, SSH: Secure Network Operations
- system, System Configuration with YaST-Loading a Vendor's Driver CD
- system services, Network Services (inetd)
- T-DSL, DSL
- time zone, Time Zone Selection
- TV, TV and Radio Cards
- users, User Administration
- X, Graphics Card and Monitor (SaX2)
- consoles
- assigning, Virtual Consoles
- graphical
- disabling, The Graphical SUSE Screen
- switching, Virtual Consoles
- core files, The Command ulimit
- cpuspeed, The powersave Package
- crashes, Manual Page of reiserfsck, Manual Page of e2fsck
- cron, The cron Package
- crypto file system, Encrypting Partitions and Files
- CVS, CVS, Introduction to CVS-For More Information
D
- data security, Data Security
- depmod, Handling Modules
- device nodes
- udev, Dynamic Device Nodes with udev
- DHCP, DHCP-For More Information
- configuring with YaST, DHCP Configuration with YaST
- dhcpd, The DHCP Server dhcpd-The DHCP Server dhcpd
- packages, DHCP Software Packages
- server, The DHCP Server dhcpd-The DHCP Server dhcpd
- static address assignment, Hosts with Fixed IP Addresses
- digital cameras, Mobile Hardware
- disks
- boot, Creating a Boot, Rescue, or Module Disk
- creating, Creating Boot CDs
- floppy
- formatting, Creating a Boot Disk in a UNIX-Type System
- module, Creating a Boot, Rescue, or Module Disk
- rescue, Creating a Boot, Rescue, or Module Disk
- DNS, Domain Name System
- BIND, Starting the Name Server BIND-Structure of Zone Files
- configuring, Host Name and DNS, DNS — Domain Name System
- domains, /etc/resolv.conf
- forwarding, Starting the Name Server BIND
- logging, The Configuration Section Logging
- mail exchanger, Domain Name System
- name servers, /etc/resolv.conf
- NIC, Domain Name System
- options, Important Configuration Options
- reverse lookup, Structure of Zone Files
- security and, DNS Poisoning
- Squid and, Local DNS Server
- starting, Starting the Name Server BIND
- top level domain, Domain Name System
- troubleshooting, Starting the Name Server BIND
- zones
- files, Structure of Zone Files
- domain name system (see DNS)
- DOS
- sharing files, Samba
E
- e-mail
- configuring, Mail Transfer Agent
- synchronization, Synchronizing Data
- synchronizing, mailsync
- mailsync, Introduction to mailsync-For More Information
- e2fsck, Manual Page of e2fsck
- editors
- Emacs, Settings for GNU Emacs-Settings for GNU Emacs
- vi, Brief Introduction to vi
- Emacs, Settings for GNU Emacs-Settings for GNU Emacs
- .emacs, Settings for GNU Emacs
- default.el, Settings for GNU Emacs
- encoding
- ISO-8859-1, Some Examples
- UTF-8, Systemwide UTF-8 Encoding
- encryption
- files, Encrypting Partitions and Files
- partitions, Encrypting Partitions and Files
- error messages
- bad interpreter, More Partitioning Tips
- permission denied, More Partitioning Tips
- Evolution, Cellular Phones and PDAs
F
- FAT file system, Resizing a Windows Partition
- file servers, NFS Client and NFS Server
- file systems, File Systems in Linux-For More Information
- ACLs, Access Control Lists in Linux-ACL Support in Applications
- e2fsck, Manual Page of e2fsck
- encrypting, Encrypting Partitions and Files
- Ext2, Ext2-Ext2
- Ext3, Ext3-Converting an Ext2 File System into
Ext3
- FAT, Resizing a Windows Partition
- JFS, JFS-JFS
- LFS, Large File Support in Linux
- limitations, Large File Support in Linux
- NTFS, Resizing a Windows Partition
- ReiserFS, ReiserFS-ReiserFS
- reiserfsck, Manual Page of reiserfsck
- repairing, Repairing File Systems
- selecting, Major File Systems in Linux
- supported, Some Other Supported File Systems-Some Other Supported File Systems
- sysfs, Devices and Interfaces
- terms, Terminology
- XFS, XFS-XFS
- files
- encrypting, Encrypting Partitions and Files
- finding, The Command locate
- synchronizing, File Synchronization-For More Information
- CVS, CVS, Introduction to CVS-For More Information
- mailsync, mailsync, Introduction to mailsync-For More Information
- rsync, rsync
- subversion, subversion
- Unison, Unison, Introduction to Unison-For More Information
- firewalls, Firewall, Masquerading and Firewalls
- packet filters, Masquerading and Firewalls, Firewalling Basics
- Squid and, Firewall Configuration with SuSEfirewall2
- SuSEfirewall2, Masquerading and Firewalls, SuSEfirewall2
- Firewire (IEEE1394)
- hard disks, Mobile Hardware
- flash drives, Mobile Hardware
- booting from, Boot Management
- floppy disks
- booting from, Boot Management
- fonts, Installing and Configuring Fonts
- CID-keyed, CID-Keyed Fonts
- TrueType, Installing and Configuring Fonts
- X11 core, X11 Core Fonts
- Xft, Xft
- FTP
- servers, From 8.0 to 8.1
G
- GPL, The GNU General Public License
- graphical user interface, Graphics Card and Monitor (SaX2)-AccessX
- graphics
- 3D, OpenGL — 3D Configuration-Additional Online Documentation
- 3Ddiag, Troubleshooting
- diagnosis, The Diagnosis Tool 3Ddiag
- drivers, Hardware Support
- installation support for, Installation Support
- SaX, OpenGL Drivers
- support for, Hardware Support
- testing, OpenGL Test Utilities
- troubleshooting, Troubleshooting
- cards
- 3D, OpenGL — 3D Configuration-Additional Online Documentation
- drivers, Device Section
- GLIDE, OpenGL — 3D Configuration-Additional Online Documentation
- OpenGL, OpenGL — 3D Configuration-Additional Online Documentation
- drivers, Hardware Support
- testing, OpenGL Test Utilities
- groups
- administering, Group Administration
- name changes, From 8.0 to 8.1
- GRUB, Booting and Boot Managers-For More Information
- boot management, Boot Management
- boot menu, The GRUB Boot Menu
- boot password, Setting a Boot Password
- boot process, The Boot Process
- boot sectors, Boot Sectors
- booting, Booting with GRUB
- commands, Booting with GRUB-Setting a Boot Password
- device names, Naming Conventions for Hard Disks and Partitions
- device.map, Booting with GRUB, The File device.map
- GRUB Geom Error, Troubleshooting
- GRUB shell, The GRUB Shell
- grub.conf, Booting with GRUB, The File /etc/grub.conf
- JFS and GRUB, Troubleshooting
- limitations, Selecting a Boot Loader
- Master Boot Record (MBR), Master Boot Record
- menu editor, Editing Menu Entries during the Boot Procedure
- menu.lst, Booting with GRUB, The GRUB Boot Menu
- partition names, Naming Conventions for Hard Disks and Partitions
- troubleshooting, Troubleshooting
- uninstalling, Uninstalling the Linux Boot Loader
H
- hard disks
- DMA, IDE DMA Mode
- parallel use of, Parallel Use of Multiple Disks
- harden_suse, From 8.0 to 8.1
- hardware
- CD-ROM, CD-ROM and DVD Drives
- ATAPI, ATAPI CD-ROM Hangs while Reading
- hard disk controllers, Hard Disk Controller
- information, Hardware Information
- ISDN, ISDN
- SCSI devices, Assigning Permanent Device File Names to SCSI Devices
- hciconfig, hciconfig
- hcitool, hcitool
- head, Shell Tools Compatible with POSIX Standard of 2001
- help
- info pages, Man Pages
- man pages, Man Pages
- X, Monitor and Modes Section
- host names, Host Name and DNS
- hotplug, The Hotplug System-The Event Recorder, Hotplug and PCMCIA
- agent, Hotplug Events, Hotplug Agents
- devices, Hotplug Agents
- interfaces, Hotplug Agents
- PCI, Automatic Module Loading
- USB, Automatic Module Loading
- blacklist, Automatic Module Loading
- device names, Devices and Interfaces
- error analysis, Error Analysis
- event recorder, The Event Recorder
- events, Hotplug Events
- log files, Log Files
- map files, Automatic Module Loading
- modules
- automatic loading of, Automatic Module Loading
- network devices, Activating Network Interfaces
- PCI, Hotplug with PCI
- storage devices, Activating Storage Devices
- whitelist, Automatic Module Loading
- hwinfo, Automatic Module Loading
I
- I18N, Language and Country-Specific Settings
- inetd, Network Services (inetd), From 8.1 to 8.2
- info pages, Man Pages
- init, The init Program-The init Program
- adding scripts, Adding init Scripts
- inittab, The init Program
- scripts, Init Scripts-Adding init Scripts
- input method
- CJK, Keyboard Mapping
- insmod, Handling Modules
- installation support
- 3D graphics cards and, Installation Support
- installing
- boot loader, Starting SUSE LINUX
- GRUB, Booting with GRUB
- network, from, Installation from a Network Source
- packages, Managing Packages: Install, Update, and Uninstall
- text mode, Text-Based Installation with YaST-Text-Based Installation with YaST
- VNC, Installation with VNC
- YaST,
Installation with YaST
-Graphical Login
- internationalization, Language and Country-Specific Settings
- Internet
- cinternet, Configuring kinternet,
cinternet, and
qinternet for Remote Use
- dial-up, smpppd as Dial-up Assistant- Configuring kinternet,
cinternet, and
qinternet for Remote Use
- DSL, DSL
- ISDN, ISDN
- kinternet, Configuring kinternet,
cinternet, and
qinternet for Remote Use
- qinternet, Configuring kinternet,
cinternet, and
qinternet for Remote Use
- smpppd, smpppd as Dial-up Assistant- Configuring kinternet,
cinternet, and
qinternet for Remote Use
- TDSL, DSL
- web servers (see Apache)
- IP addresses
- classes, IP Addresses
- dynamic assignment, DHCP
- IPv6, IPv6 — The Next Generation Internet
- configuring, Configuring IPv6
- masquerading, Masquerading Basics
- private, Netmasks and Routing
- IrDA, Wireless Communication, Infrared Data Transmission-Troubleshooting
- configuring, Configuration
- starting, Configuration
- stopping, Configuration
- troubleshooting, Troubleshooting
K
- kernels, The Linux Kernel-Cleaning Your Hard Disk after Compilation
- caches, The free Command
- compiling, The Linux Kernel, Compiling the Kernel
- configuring, Kernel Configuration-Settings in the Kernel Configuration
- daemon, Kmod — the Kernel Module Loader
- error messages, Compiling the Kernel
- installing, Installing the Kernel-Installing the Kernel
- limits, Large File Support in Linux
- modprobe.conf, /etc/modprobe.conf
- module loader, Kmod — the Kernel Module Loader
- modules, Kernel Modules-Kmod — the Kernel Module Loader
- compiling, Compiling the Kernel
- modprobe.conf, Upgrading to Kernel 2.6
- network cards, Requirements
- parameters, The Linux Kernel
- problems, Possible Difficulties — Custom Kernels
- sources, Kernel Sources-Kernel Sources
- version 2.6, Upgrading to Kernel 2.6
- keyboard
- Asian characters, Keyboard Mapping
- configuring, Keyboard Layout Selection
- layout, Keyboard Mapping
- mapping, Keyboard Mapping
- compose, Keyboard Mapping
- multikey, Keyboard Mapping
- X Keyboard Extension, Keyboard Mapping
- XKB, Keyboard Mapping
- Kmod (see kernels, module loader)
- Kontact, Cellular Phones and PDAs
- KPilot, Cellular Phones and PDAs
- KPowersave, System Monitoring
- KSysguard, System Monitoring
L
- L10N, Language and Country-Specific Settings
- languages, Language Selection
- laptops, Laptops-Data Security
- hardware, Special Properties of Laptop Hardware
- IrDA, Infrared Data Transmission-Troubleshooting
- PCMCIA, Special Properties of Laptop Hardware, Hotplug and PCMCIA
- power management, Power Conservation, Power Management-Rest for the Hard Disk
- SCPM, Integration in Changing Operating Environments, System Configuration Profile Management
- SLP, Integration in Changing Operating Environments
- LDAP, LDAP — A Directory Service-For More Information
- access control, Global Directives in slapd.conf
- ACLs, Global Directives in slapd.conf
- adding data, Inserting Data into an LDAP Directory
- administering groups, Users and Groups — Configuration with YaST
- administering users, Users and Groups — Configuration with YaST
- deleting data, Deleting Data from an LDAP Directory
- directory tree, Structure of an LDAP Directory Tree
- ldapadd, Inserting Data into an LDAP Directory
- ldapdelete, Deleting Data from an LDAP Directory
- ldapmodify, Modifying Data in the LDAP Directory
- ldapsearch, Searching or Reading Data from an LDAP Directory
- modifying data, Modifying Data in the LDAP Directory
- searching data, Searching or Reading Data from an LDAP Directory
- server configuration, Server Configuration with slapd.conf
- YaST
- modules, Configuration of the LDAP Client
- templates, Configuration of the LDAP Client
- YaST LDAP client, The YaST LDAP Client
- LFS, Large File Support in Linux
- license (see GPL)
- Lightweight Directory Access Protocol (see LDAP)
- LILO
- configuring, Starting SUSE LINUX
- Linux
- networks and, Linux in the Network
- sharing files with another OS, Samba
- uninstalling, Uninstalling the Linux Boot Loader
- linuxrc, linuxrc
- linuxthreads, Native POSIX Thread Library and glibc
2.3.x
- Local Area Networks (see networks, LANs)
- locale
- UTF-8, Systemwide UTF-8 Encoding
- localization, Language and Country-Specific Settings
- locate, The Command locate
- log files, Log Files: Package logrotate
- apache2, Using Apache, Troubleshooting
- boot.msg, Boot Log, ACPI
- httpd, ErrorLog, Using Apache, Troubleshooting
- log, Security Settings
- messages, System Log, Starting the Name Server BIND, Manual Configuration
- Squid, Commands for Starting and Stopping Squid, General Configuration Options (Selection), Firewall Configuration with SuSEfirewall2
- Unison, Using Unison
- XFree86, Troubleshooting
- logging
- login attempts, Security Settings
- logrotate
- configuring, Configuration
- Logical Volume Manager (see LVM)
- logrotate, Log Files: Package logrotate
- LSB
- installing packages, RPM — the Package Manager
- lsmod, Handling Modules
- LVM
- YaST, Logical Volume Manager (LVM)
M
- man pages, Man Pages
- masquerading, Masquerading Basics
- configuring with SuSEfirewall2, SuSEfirewall2
- Master Boot Record (see MBR)
- MBR, Master Boot Record, Boot Sectors
- memory
- RAM, The free Command
- mobility, Mobile Computing with Linux-For More Information
- cellular phones, Cellular Phones and PDAs
- data security, Data Security
- digital cameras, Mobile Hardware
- external hard disks, Mobile Hardware
- Firewire (IEEE1394), Mobile Hardware
- laptops, Special Properties of Laptop Hardware
- PDAs, Cellular Phones and PDAs
- USB, Mobile Hardware
- modems
- cable, Cable Modem
- YaST, Modem
- modinfo, Handling Modules
- modprobe, Handling Modules
- modules
- loading, Loading Modules
- parameters, Entering Parameters
- monitor settings, Graphics Card and Monitor (SaX2)
- mountd, Exporting File Systems Manually
- mouse
- configuring, Mouse
- multicast DNS, Top-Level Domain .local as link-local Domain
N
- name servers (see DNS)
- NAT (see masquerading)
- NetBIOS, Samba
- Network File System (see NFS)
- Network Information Service (see NIS)
- networks, Linux in the Network
- base network address, Netmasks and Routing
- Bluetooth, Wireless Communication, Configuring Bluetooth with YaST
- broadcast address, Netmasks and Routing
- configuration files, Configuration Files-/etc/HOSTNAME
- configuring, Network Devices-Configuring Samba Servers and Clients, Manual Network Configuration-Routing in SUSE LINUX
- IPv6, Configuring IPv6
- DHCP, DHCP
- DNS, Domain Name System
- integrating, Network Integration-Routing in SUSE LINUX
- IrDA, Wireless Communication
- LANs, Network Integration-Routing in SUSE LINUX
- localhost, Netmasks and Routing
- netmasks, Netmasks and Routing
- routing, Routing, IP Addresses and Routing, Netmasks and Routing
- SLP, SLP Services in the Network
- TCP/IP, Introduction to TCP/IP
- wireless, Wireless Communication
- WLAN, Wireless Communication
- YaST, Configuring the Network Card with YaST
- NFS, NFS — Shared File Systems
- clients, NFS Client and NFS Server, Importing File Systems with YaST
- exporting, Exporting File Systems Manually
- importing, Importing File Systems Manually
- mounting, Importing File Systems Manually
- permissions, Exporting File Systems Manually
- servers, NFS Client and NFS Server, Exporting File Systems with YaST
- nfsd, Exporting File Systems Manually
- NGPT, Native POSIX Thread Library and glibc
2.3.x
- nice, Shell Tools Compatible with POSIX Standard of 2001
- NIS, NIS — Network Information Service-The NIS Client Module of YaST
- clients, The NIS Client Module of YaST
- masters, NIS Master and Slave Servers-NIS Master and Slave Servers
- slaves, NIS Master and Slave Servers-NIS Master and Slave Servers
-
notebooks
(see laptops)
- NPTL, Native POSIX Thread Library and glibc
2.3.x, Adaptions for Native POSIX Thread
Library
- NSS, /etc/nsswitch.conf
- databases, /etc/nsswitch.conf
- NTFS file system, Resizing a Windows Partition
- NTP
- client, NTP Client
- nVidia, From 8.1 to 8.2
P
- packages
- building, From 8.2 to 9.0
- compiling, Installing and Compiling Source Packages
- compiling with build, Compiling RPM Packages with build
- installing, Managing Packages: Install, Update, and Uninstall
- LSB, RPM — the Package Manager
- package manager, RPM — the Package Manager
- RPMs, RPM — the Package Manager
- uninstalling, Managing Packages: Install, Update, and Uninstall
- verifying, Verifying Package Authenticity
- packet filters (see firewalls)
- PAM, PAM — Pluggable Authentication Modules-For More Information
- pand, Network Connection between Two Hosts
- partitions
- creating, Partitioning, Expert Partitioning with YaST, Creating a Partition
- encryption, Encrypting Partitions and Files
- expert, Partitioning for Experts
- fstab, More Partitioning Tips
- LVM, Partitioning Parameters
- optimizing, Optimization
- parameters, Partitioning Parameters
- partition table, Master Boot Record
- RAID, Partitioning Parameters
- resizing Windows, Resizing a Windows Partition
- swap, Partitioning Parameters, Size of the Swap Partition
- types, Partition Types
- YaST, LVM Configuration
- PCMCIA, Special Properties of Laptop Hardware, PCMCIA, Hotplug and PCMCIA
- card manager, Card Manager
- configuring, Configuration
- IrDA, Infrared Data Transmission-Troubleshooting
- ISDN, ISDN
- modem, Modem
- network cards, Network Cards
- SCSI, SCSI and IDE
- troubleshooting, Troubleshooting
- utilities, Utilities
- PDAs, Cellular Phones and PDAs
- permissions
- ACLs, Access Control Lists in Linux-ACL Support in Applications
- file permissions, Configuration
- phone exchange, ISDN
- Pluggable Authentication Modules (see PAM)
- ports
- 53, Important Configuration Options
- scanning, Firewall Configuration with SuSEfirewall2
- PostgreSQL
- updating, PostgreSQL
- power management, Power Conservation, Power Management-Rest for the Hard Disk, The powersave Package-
Using ACPI, Powersave Does
Not Notice Battery Limits
- ACPI, Power Management, ACPI-For More Information, Configuring APM and ACPI
- APM, Power Management, APM, Configuring APM and ACPI
- battery monitor, Power Saving Functions
- charge level, Custom Battery States
- cpufrequency, The powersave Package
- cpuspeed, The powersave Package
- hibernation, Power Saving Functions
- powersave, The powersave Package
- standby, Power Saving Functions
- suspend, Power Saving Functions
- YaST, The YaST Power Management Module
- powersave, The powersave Package
- configuring, Configuring the powersave Package
- printing, Printer-For More Information, Printer Operation
- applications, from, Configuration for Applications
- command line, Configuration for Applications
- configuring with YaST, Configuration with YaST
- connection, Manual Configuration
- CUPS, Configuration for Applications
- drivers, Manual Configuration
- foomatic-filters, From 8.2 to 9.0
- GDI printers, Supported Printers, Printers without Standard Printer Language Support
- Ghostscript driver, Manual Configuration
- IrDA, Usage
- kprinter, Configuration for Applications
- LPRng, From 8.2 to 9.0
- network
- troubleshooting, Network Printer Connections
- port, Manual Configuration
- PPD file, Manual Configuration
- printer languages, Some Standard Printer Languages
- problems, Troubleshooting
- processing a print job, How a Print Job is Processed
- queues, Manual Configuration
- Samba, Samba
- supported printers, Supported Printers
- test page, Manual Configuration
- troubleshooting, Troubleshooting
- network, Network Printer Connections
- xpp, Configuration for Applications
- protocols
- FTP, URLs
- HTTP, URLs
- HTTPS, URLs
- IPv6, IPv6 — The Next Generation Internet
- LDAP, LDAP — A Directory Service
- SLP, SLP Services in the Network
- SMB, Samba
- proxies (see Squid)
- advantages, Squid as Proxy Cache
- caches, Squid as Proxy Cache
- transparent, Configuring a Transparent Proxy
R
- RAID
- soft, Soft RAID
- reiserfsck, Manual Page of reiserfsck
- removable media
- subfs, Removable Media with subfs
- repairing systems, System Repair
- rescue system, The SUSE Rescue System
- starting, Starting the Rescue System
- using, Working with the Rescue System
- resolver library
- .local as top-level domain, Top-Level Domain .local as link-local Domain
- RFCs, Introduction to TCP/IP
- rmmod, Handling Modules
- routing, Routing, IP Addresses and Routing, Routing in SUSE LINUX-Routing in SUSE LINUX
- masquerading, Masquerading Basics
- netmasks, Netmasks and Routing
- routes, Routing in SUSE LINUX
- static, Routing in SUSE LINUX
- RPM, RPM — the Package Manager-Tools for RPM Archives and the RPM Database
- database
- rebuilding, Managing Packages: Install, Update, and Uninstall, RPM Queries
- dependencies, Managing Packages: Install, Update, and Uninstall
- patches, RPM and Patches
- queries, RPM Queries
- rpmnew, Managing Packages: Install, Update, and Uninstall
- rpmorig, Managing Packages: Install, Update, and Uninstall
- rpmsave, Managing Packages: Install, Update, and Uninstall
- security, Some General Security Tips and Tricks
- SRPMS, Installing and Compiling Source Packages
- tools, Tools for RPM Archives and the RPM Database
- uninstalling, Managing Packages: Install, Update, and Uninstall
- updating, Managing Packages: Install, Update, and Uninstall
- verify, RPM Queries
- verifying, Verifying Package Authenticity
- version, From 8.2 to 9.0
- rpmbuild, From 8.2 to 9.0, RPM — the Package Manager
- rsync, rsync, Introduction to rsync
- runlevels, Runlevel Editor-Runlevel Editor, Runlevels-Changing Runlevels
- changing, Changing Runlevels-Changing Runlevels
- editing in YaST, The YaST Runlevel Editor
- switching, Runlevel Editor
S
- Samba, Samba-Optimization
- clients, Configuring Samba Servers and Clients, Samba-Samba, Configuring Clients-Windows 9x and ME, Configuring a Samba Client with YaST
- configuring, Configuring the Server
- help, Optimization
- installing, Configuring the Server
- login, Samba as Login Server
- names, Samba
- optimizing, Optimization
- permissions, Security Levels
- printers, Samba
- printing, Windows 9x and ME
- security, Security Levels-Security Levels
- servers, Configuring Samba Servers and Clients, Configuring the Server
- shares, Samba, Shares
- SMB, Samba
- starting, Configuring the Server
- stopping, Configuring the Server
- swat, Security Levels
- TCP/IP and, Samba
- SaX, Graphics Card and Monitor (SaX2)
- multihead, Multihead
- scanning
- configuring, Scanner
- troubleshooting, Troubleshooting
- SCPM, Profile Manager (SCPM), System Configuration Profile Management
- advanced settings, Advanced Profile Settings
- configuring, Configuration
- laptops, Integration in Changing Operating Environments
- managing profiles, Creating and Managing Profiles
- resource groups, Starting SCPM and Defining Resource Groups
- starting, Starting SCPM and Defining Resource Groups
- switching profiles, Switching Configuration Profiles
- screen
- resolution, Screen Section
- scripts
- boot.udev, Consistent Names for Mass Storage Devices
- init.d, The init Program, Init Scripts-Adding init Scripts, Start-up Scripts
- boot, Init Scripts
- boot.local, Init Scripts
- boot.setup, Init Scripts
- halt, Init Scripts
- network, Start-up Scripts
- nfsserver, Start-up Scripts, Exporting File Systems Manually
- portmap, Start-up Scripts, Exporting File Systems Manually
- rc, Changing Runlevels, Init Scripts
- sendmail, Start-up Scripts
- squid, Commands for Starting and Stopping Squid
- xinetd, Start-up Scripts
- ypbind, Start-up Scripts
- ypserv, Start-up Scripts
- irda, Configuration
- mkinitrd, Creating an initrd
- modify_resolvconf, The File /etc/resolv.conf, /etc/resolv.conf
- SuSEconfig, SuSEconfig and /etc/sysconfig-SuSEconfig and /etc/sysconfig
- disabling, SuSEconfig and /etc/sysconfig
- SCSI devices
- configuring, Assigning Permanent Device File Names to SCSI Devices
- file names, assigning, Assigning Permanent Device File Names to SCSI Devices
- sdptool, sdptool
- security, Security and Confidentiality-Using the Central Security Reporting Address
- attacks, DoS — Denial of Service-Worms
- booting, Local Security and Network Security, The Boot Procedure-The Boot Procedure
- bugs and, Buffer Overflows and Format String Bugs, Buffer Overflows and Format String Bugs
- configuring, Security and Users-Firewall
- DNS, DNS Poisoning
- encrypted file system, Data Security
- engineering, Local Security and Network Security
- firewalls, Firewall, Masquerading and Firewalls
- local, Local Security-Viruses
- network, Network Security-Worms
- passwords, Passwords-Passwords
- permissions, File Permissions-File Permissions
- reporting problems, Using the Central Security Reporting Address
- RPM signatures, Some General Security Tips and Tricks
- Samba, Security Levels
- serial terminals, Local Security and Network Security
- Squid, Squid and Security
- SSH, SSH: Secure Network Operations-X, Authentication, and Forwarding Mechanisms
- tcpd, Some General Security Tips and Tricks
- tips and tricks, Some General Security Tips and Tricks
- viruses, Viruses
- worms, Worms
- X and, X Window System and X Authentication
- Service Location Protocol (see SLP)
- SGML
- directories, XML Resources in /usr/share/xml
- openjade, From 8.1 to 8.2
- SLP, Integration in Changing Operating Environments, SLP Services in the Network
- browser, SLP Front-Ends in SUSE LINUX
- Konqueror, SLP Front-Ends in SUSE LINUX
- registering services, Registering Your Own Services
- slptool, SLP Front-Ends in SUSE LINUX
- SMB (see Samba)
- software
- compiling, Installing and Compiling Source Packages
- installing, Installing and Removing Software-The Resource Window
- removing, Installing and Removing Software-The Resource Window
- sort, Shell Tools Compatible with POSIX Standard of 2001
- sound
- configuring in YaST, Sound
- fonts, Sound Configuration
- mixers, Sound Mixer kmix
- source
- compiling, Installing and Compiling Source Packages
- spm, Installing and Compiling Source Packages
- Squid, Proxy Server: Squid
- access controls, Cache Manager ACLs in /etc/squid/squid.conf
- ACLs, Options for Access Controls
- Apache, Setup
- cachemgr.cgi, cachemgr.cgi, Viewing the Statistics
- caches, Squid as Proxy Cache, Multiple Caches
- size, Size of the Disk Cache
- Calamaris, Cache Report Generation with Calamaris
- configuring, The Configuration File /etc/squid/squid.conf
- CPU and, CPU
- damaged cache, Commands for Starting and Stopping Squid
- directories, Commands for Starting and Stopping Squid
- DNS, Local DNS Server
- features, Squid as Proxy Cache
- firewalls and, Firewall Configuration with SuSEfirewall2
- log files, Commands for Starting and Stopping Squid, General Configuration Options (Selection), Firewall Configuration with SuSEfirewall2
- object status, Caching Internet Objects
- permissions, Commands for Starting and Stopping Squid, Options for Access Controls
- RAM and, RAM
- reports, Cache Report Generation with Calamaris
- security, Squid and Security
- squidGuard, squidGuard
- starting, Starting Squid
- statistics, cachemgr.cgi, Viewing the Statistics
- stopping, Commands for Starting and Stopping Squid
- system requirements, System Requirements
- transparent proxies, Configuring a Transparent Proxy, Firewall Configuration with SuSEfirewall2
- troubleshooting, Commands for Starting and Stopping Squid
- uninstalling, Commands for Starting and Stopping Squid
- SSH, SSH: Secure Network Operations-X, Authentication, and Forwarding Mechanisms
- authentication mechanisms, SSH Authentication Mechanisms
- daemon, The SSH Daemon (sshd) — Server-Side
- key pairs, The SSH Daemon (sshd) — Server-Side, SSH Authentication Mechanisms
- scp, scp — Secure Copy
- sftp, sftp — Secure File Transfer
- ssh, The ssh Program
- ssh-agent, SSH Authentication Mechanisms, X, Authentication, and Forwarding Mechanisms
- ssh-keygen, SSH Authentication Mechanisms
- sshd, The SSH Daemon (sshd) — Server-Side
- X and, X, Authentication, and Forwarding Mechanisms
- subfs
- removable media, Removable Media with subfs
- subversion, subversion, Introduction to Subversion
- support, Submitting a Support Request
- SUSE LINUX
- installation, linuxrc
- sx, From 8.1 to 8.2
- synchronizing data, Synchronizing Data
- e-mail, Synchronizing Data
- Evolution, Cellular Phones and PDAs
- Kontact, Cellular Phones and PDAs
- KPilot, Cellular Phones and PDAs
- system
- configuring, System Configuration with YaST-Loading a Vendor's Driver CD
- freezes, Starting SUSE LINUX
- information, System Information
- language, Language Selection
- limiting resource use, The Command ulimit
- localizing, Language and Country-Specific Settings
- rescuing, The SUSE Rescue System
- security, Security Settings
- updating, System Update, Updating the System and Package Management-Tools for RPM Archives and the RPM Database
- system monitoring, System Monitoring
- KPowersave, System Monitoring
- KSysguard, System Monitoring
- system services, Network Services (inetd)
T
- T-DSL (see ADSL)
- tail, Shell Tools Compatible with POSIX Standard of 2001
- TCP/IP, Introduction to TCP/IP
- ICMP, Introduction to TCP/IP
- IGMP, Introduction to TCP/IP
- layer model, Layer Model
- packets, Introduction to TCP/IP, Layer Model
- services, Introduction to TCP/IP
- TCP, Introduction to TCP/IP
- UDP, Introduction to TCP/IP
- thread packages
- NPTL, Adaptions for Native POSIX Thread
Library
- time zones, Time Zone Selection
- TV
- card configuration, TV and Radio Cards
U
- udev, Dynamic Device Nodes with udev
- automization, Automization with NAME and SYMLINK
- keys, Key Selection
- mass storage, Consistent Names for Mass Storage Devices
- regular expressions, Regular Expressions in Keys
- rules, Creating Rules
- start script, Consistent Names for Mass Storage Devices
- sysfs, Key Selection
- udevinfo, Key Selection
- YaST, Consistent Names for Mass Storage Devices
- ulimit, The Command ulimit
- options, The Command ulimit
- uninstalling
- GRUB, Uninstalling the Linux Boot Loader
- Linux, Uninstalling the Linux Boot Loader
- updating, Updating the System and Package Management-Tools for RPM Archives and the RPM Database
- online, YaST Online Update-YaST Online Update
- passwd and group, Checking passwd and group in /etc
- problems, Possible Problems
- sound mixers, Sound Mixer kmix
- YaST, Updating with YaST
- USB
- flash drives, Mobile Hardware
- hard disks, Mobile Hardware
- users
- /etc/passwd, The PAM Configuration of sshd, Standard Procedure
- administering with YaST, User Administration
- name changes, From 8.0 to 8.1
- UTF-8
- encoding, Systemwide UTF-8 Encoding
X
- X, The X Window System
- 3D, 3D Acceleration
- character sets, Installing and Configuring Fonts
- CID-keyed fonts, CID-Keyed Fonts
- configuring, Graphics Card and Monitor (SaX2)
- drivers, Device Section
- font systems, Installing and Configuring Fonts
- fonts, Installing and Configuring Fonts
- help, Monitor and Modes Section
- multihead, Multihead
- optimizing, Optimizing the X Configuration
- SaX2, Optimizing the X Configuration
- security, X Window System and X Authentication
- SSH and, X, Authentication, and Forwarding Mechanisms
- TrueType fonts, Installing and Configuring Fonts
- virtual screen, Screen Section
- X11 core fonts, X11 Core Fonts
- xf86config, Optimizing the X Configuration
- xft, Installing and Configuring Fonts
- Xft, Xft
- X Keyboard Extension (see keyboard, X Keyboard Extension)
- X Window System (see X)
- X.Org, Optimizing the X Configuration
- XF86Config
- color depth, Screen Section
- Depth, Screen Section
- Device, Screen Section
- Display, Screen Section
- Files, Optimizing the X Configuration
- InputDevice, Optimizing the X Configuration
- Modeline, Screen Section
- modelines, Optimizing the X Configuration
- Modes, Optimizing the X Configuration, Screen Section
- Monitor, Optimizing the X Configuration, Screen Section
- ServerFlags, Optimizing the X Configuration
- Xft, Xft
- xinetd, From 8.1 to 8.2
- XKB (see keyboard, X Keyboard Extension)
- XML
- catalog, From 8.2 to 9.0
- directories, XML Resources in /usr/share/xml
- openjade, From 8.1 to 8.2
Y
- YaST
- 3D, Hardware Support
- backups, Backup, Backup Copy of the System Areas
- boot configuration, Configuring the Boot Loader with YaST
- boot mode, Boot Configuration
- cable modem, Cable Modem
- CD-ROM, CD-ROM and DVD Drives
- configuring, System Configuration with YaST-Loading a Vendor's Driver CD
- Control Center, The YaST Control Center
- DHCP, DHCP Configuration with YaST
- disk creation, Creating a Boot, Rescue, or Module Disk
- disk space, Required Disk Space
- DMA, IDE DMA Mode
- DNS, Host Name and DNS
- driver CDs, Loading a Vendor's Driver CD
- DSL, DSL
- e-mail, Mail Transfer Agent
- firewall, Firewall
- graphical user interface, Graphics Card and Monitor (SaX2)-AccessX
- graphics card, Graphics Card and Monitor (SaX2)
- graphics cards, Graphics Card
- group administration, Group Administration
- hard disk controllers, Hard Disk Controller
- hardware, Hardware-TV and Radio Cards
- hardware information, Hardware Information
- host name, Host Name and DNS
- installation mode, Installation Mode
- installation scope, Changing the Installation Scope
- installation sources, Change Installation Source
- installation suggestion, Installation Suggestion
- installing with,
Installation with YaST
-Graphical Login
- ISDN, ISDN
- joysticks, Joystick
- keyboard layout, Keyboard Layout, Keyboard Layout Selection
- language, Language Selection
- language selection, Language Selection
- LDAP client, The YaST LDAP Client
- LVM, LVM, Logical Volume Manager (LVM)
- manual installation, The Boot Screen
- modem, Modem
- monitor settings, Graphics Card and Monitor (SaX2)
- mouse, Mouse, Mouse
- ncurses, YaST in Text Mode (ncurses)
- network card, Configuring the Network Card with YaST
- network configuration, Network Configuration, Network Devices-Configuring Samba Servers and Clients
- NFS client, NFS Client and NFS Server
- NFS server, NFS Client and NFS Server
- NIS clients, Configuring the Host as a NIS Client, The NIS Client Module of YaST
- NTP
- client, NTP Client
- online update, YaST Online Update-YaST Online Update, The YOU Module
- package dependencies, Package Dependencies and Conflicts
- package manager, The Package Manager
- partitioning, Partitioning, Expert Partitioning with YaST, LVM Configuration
- power management, The YaST Power Management Module
- printing, Printer-For More Information
- profile manager, Profile Manager (SCPM)
- radio cards, TV and Radio Cards
- RAID, Soft RAID
- repairing systems, System Repair
- root password, root Password
- routing, Routing
- runlevels, The YaST Runlevel Editor
- safe settings, The Boot Screen
- Samba
- clients, Configuring Samba Servers and Clients, Configuring a Samba Client with YaST
- servers, Configuring Samba Servers and Clients
- scanner, Scanner
- SCPM, Profile Manager (SCPM)
- security, Security and Users-Firewall
- sendmail, Mail Transfer Agent
- SLP browser, SLP Front-Ends in SUSE LINUX
- software, Software-Update Options
- software updates, Loading Software Updates
- sound cards, Sound
- starting, System Start-up for Installation, Starting YaST
- support request, Submitting a Support Request
- sysconfig editor, Sysconfig Editor, The YaST sysconfig Editor
- system security, Security Settings
- system start-up, System Start-up for Installation
- T-DSL, DSL
- text mode, YaST in Text Mode (ncurses)-Online Update from the Command Line, Text-Based Installation with YaST-Text-Based Installation with YaST
- modules, Starting the Individual Modules
- troubleshooting, Text-Based Installation with YaST
- time zone, Time Zone Selection
- TV cards, TV and Radio Cards
- updating, System Update, Updating with YaST
- user administration, User Administration
- YOU, YaST Online Update-YaST Online Update
- YP (see NIS)