Chapter 17. Heterogenous Networks

Table of Contents

17.1. Samba
17.2. Netatalk
17.3. NetWare Emulation with MARSNWE


In addition to connecting to other Linux systems, Linux is also able to connect to Windows and Macintosh computers and communicate over Novell networks. This chapter shows the requirements for and configuration of heterogenous networks.

17.1. Samba

17.1.1. Introduction to Samba

With the program Samba, convert a UNIX machine into a file and print server for DOS, Windows, and OS/2 machines. The Samba Project is run by the Samba Team and was originally developed by the Australian Andrew Tridgell.

Samba has now become a fully-fledged and rather complex product. This section presents an overview of its basic functionality. Samba offers plenty of online documentation. Enter apropos samba at the command line to display some manual pages or just browse the /usr/share/doc/packages/samba directory if Samba is installed for more online documentation and examples. A commented example configuration (smb.conf.SuSE) can be found in the examples subdirectory.

Beginning from version 9.1, the SUSE LINUX samba package provides version 3 of the Samba suite, which brings some important added features:

  • Support for Active Directory

  • Much improved Unicode support

  • The internal authentication mechanisms have been completely revised

  • Improved support for the Windows 200x/XP printing system

  • Servers can be set up as member servers in Active Directory domains

  • Adoption of an NT4 domain, enabling the migration from the latter to a Samba domain.

Samba uses the SMB protocol (Server Message Block) that is based on the NetBIOS™ services. Due to pressure from IBM, Microsoft released the protocol so other software manufacturers could establish connections to a Microsoft domain network. With Samba, the SMB protocol works on top of the TCP/IP protocol, so the TCP/IP protocol must be installed on all clients.

[Tip]Migration to Samba3

There are some special points to take into account when migrating from Samba 2.x to Samba 3. A discussion of this topic is included in the Samba HOWTO Collection, where an entire chapter is dedicated to it. After installing the samba-doc package, find the HOWTO in /usr/share/doc/packages/samba/Samba-HOWTO-Collection.pdf. NetBIOS

NetBIOS is a software interface (API) designed for communication between machines. Here, a name service is provided. It enables machines connected to the net to reserve names for themselves. After reservation, these machines can be addressed by name. There is no central process that checks names. Any machine on the network can reserve as many names as it wants, if the names are not already in use. The NetBIOS interface can now be implemented for different network architectures. An implementation that works relatively closely with network hardware is called NetBEUI™, but this is often referred to as NetBIOS™. Network protocols implemented with NetBIOS are IPX from Novell™ (NetBIOS via TCP/IP) and TCP/IP.

The NetBIOS names sent via TCP/IP have nothing in common with the names used in /etc/hosts or those defined by DNS. NetBIOS uses its own, completely independent naming convention. However, it is recommended to use names that correspond to DNS host names to make administration easier. This is the default used by Samba. Clients

All common operating systems, such as Mac OS X, Windows, and OS/2, support the SMB protocol. The TCP/IP protocol must be installed on all computers. Samba provides a client for the different UNIX flavors. For Linux, there is a file-system kernel module for SMB that allows the integration of SMB resources on the Linux system level.

SMB servers provide hardware space to their clients by means of shares. A share includes a directory and its subdirectories on the server. It is exported by means of a name and can be accessed by its name. The share name can be set to any name — it does not have to be the name of the export directory. A printer is also assigned a name. Clients can access the printer by its name.

17.1.2. Installing and Configuring the Server

If you intend to use Samba as a server, install samba. The services required for Samba can be started with rcnmb start && rcsmb start and stopped with rcsmb stop && rcnmb stop.

The main configuration file of Samba is /etc/samba/smb.conf. This file can be divided into two logical parts. The [global] section contains the central and global settings. The [share] sections contain the individual file and printer shares. By means of this approach, details regarding the shares can be set differently or globally in the [global] section, which enhances the structural transparency of the configuration file. The global Section

The following parameters of the [global] section need some adjustment to match the requirements of your network setup so other machines can access your Samba server via SMB in a Windows environment.

workgroup = TUX-NET

This line assigns the Samba server to a workgroup. Replace TUX-NET with an appropriate workgroup of your networking environment. Your Samba server appears under its DNS name unless this name has been assigned to any other machine in the net. If the DNS name is not available, set the server name using netbiosname=MYNAME. See mansmb.conf for more details about this parameter.

os level = 2

This parameter triggers whether your Samba server tries to become LMB (Local Master Browser) for its work group. Choose a very low value to spare the existing Windows network from any disturbances caused by a misconfigured Samba server. More information about this important topic can be found in the files BROWSING.txt and BROWSING-Config.txt under the textdocs subdirectory of the package documentation.

If no other SMB server is present in your network (such as a Windows NT or 2000 server) and you want the Samba server to keep a list of all systems present in the local environment, set the os level to a higher value (for example, 65). Your Samba server is then chosen as LMB for your local network.

When changing this setting, consider carefully how this could affect an existing Windows network environment. A misconfigured Samba server can cause serious problems when trying to become LMB for its workgroup. Contact your administrator and subject your configuration to some heavy testing either in an isolated network or at a noncritical time of day.

wins support and wins server

To integrate your Samba server into an existing Windows network with an active WINS server, enable the wins server option and set its value to the IP address of that WINS server.

If your Windows machines are connected to separate subnets and should still be aware of each other, you need to set up a WINS server. To turn a Samba server into such a WINS server, set the option wins support = Yes. Make sure that only one Samba server of the network has this setting enabled. The options wins server and wins support must never be enabled at the same time in your smb.conf file. Shares

The following examples illustrate how a CD-ROM drive and the user directories (homes) are made available to the SMB clients.


To avoid having the CD-ROM drive accidentally made available, these lines are deactivated with comment marks (semicolons in this case). Remove the semicolons in the first column to share the CD-ROM drive with Samba.

Example 17.1. A CD-ROM Share

;       comment = Linux CD-ROM
;       path = /media/cdrom
;       locking = No
[cdrom] and comment

The entry [cdrom] is the name of the share that can be seen by all SMB clients on the net. An additional comment can be added to further describe the share.

path = /media/cdrom

path exports the directory /media/cdrom.

By means of a very restrictive default configuration, this kind of share is only made available to the users present on this system. If this share should be made available to everybody, add a line guest ok = yes to the configuration. This setting gives read permissions to anyone on the network. It is recommended to handle this parameter with great care. This applies even more to the use of this parameter in the [global] section.


The [home] share is of special importance here. If the user has a valid account and password for the Linux file server and his own home directory, he can be connected to it.

Example 17.2. homes Share

	comment = Home Directories
	valid users = %S
	browseable = No
	read only = No
	create mask = 0640
	directory mask = 0750

As long as there is no other share using the share name of the user connecting to the SMB server, a share is dynamically generated using the [homes] share directives. The resulting name of the share is identical to the user name.

valid users = %S

%S is replaced by the concrete name of the share as soon as a connection has been successfully established. For a [homes] share, this is always identical to the user's name. As a consequence, access rights to a user's share are restricted exclusively to the user.

browseable = No

This setting enables the share to be invisible in the network environment.

read only = No

By default, Samba prohibits write access to any exported share by means of the read only = Yes parameter. To make a share writable, set the value read only = No, which is synonymous with writeable = Yes.

create mask = 0640

Systems that are not based on MS Windows NT do not understand the concept of UNIX permissions, so they cannot assign permissions when creating a file. The parameter create mask defines the access permissions assigned to newly created files. This only applies to writable shares. In effect, this setting means the owner has read and write permissions and the members of the owner's primary group have read permissions. valid users = %S prevents read access even if the group has read permissions. Therefore, if you want the group to have read or write access, the line valid users = %S must be deactivated. Security Levels

The SMB protocol comes from the DOS and Windows world and directly takes into consideration the problem of security. Each share access can be protected with a password. SMB has three possible ways of checking the permissions:

Share Level Security (security = share):

A password is firmly assigned to a share. Everyone who knows this password has access to that share.

User Level Security (security = user):

This variation introduces the concept of the user to SMB. Each user must register with the server with his own password. After registering, the server can grant access to individual exported shares dependent on user names.

Server Level Security (security = server):

To its clients, Samba pretends to be working in User Level Mode. However, it passes all password queries to another User Level Mode Server, which takes care of authentication. This setting expects an additional parameter (password server =).

The distinction between share, user, and server level security applies to the entire server. It is not possible to offer individual shares of a server configuration with share level security and others with user level security. However, you can run a separate Samba server for each configured IP address on a system.

More information about this subject can be found in the Samba HOWTO Collection. For multiple servers on one system, pay attention to the options interfaces and bind interfaces only.


For simple administration tasks with the Samba server, there is also the program swat. It provides a simple web interface with which to configure the Samba server conveniently. In a web browser, open http://localhost:901 and log in as user root. However, swat must also be activated in the files /etc/xinetd.d/samba and /etc/services. To do so in /etc/xinetd.d/samba, edit the disable line so it reads: disable = no. More information about swat is provided in the man page.

17.1.3. Samba as Login Server

In networks where predominantly Windows clients are found, it is often preferable that users may only register with a valid account and password. This can be brought about with the help of a Samba server. In a Windows-based network, this task is handled by a Windows NT server configured as a primary domain controller (PDC). The entries that must be made in the [global] section of smb.conf are shown in File 17.3. “Global Section in smb.conf”.

Example 17.3. Global Section in smb.conf

  workgroup = TUX-NET
  domain logons = Yes
  domain master = Yes

If encrypted passwords are used for verification purposes — this is the default setting with well-maintained MS Windows 9x installations, MS Windows NT 4.0 from service pack 3, and all later products — the Samba server must be able to handle these. The entry encrypt passwords = yes in the [global] section enables this (with Samba version 3 this is now the default). In addition, it is necessary to prepare user accounts and passwords in an encryption format that conforms with Windows. This is done with the command smbpasswd -a name. Create the domain account for the computers, required by the Windows NT domain concept, with the following commands:

Example 17.4. Setting up a Machine Account

useradd hostname\$
smbpasswd -a -m hostname

With the useradd command, a dollar sign is added. The command smbpasswd inserts this automatically when the parameter -m is used. The commented configuration example (/usr/share/doc/packages/Samba/examples/smb.conf.SuSE) contains settings that automate this task.

Example 17.5. Automated Setup of a Machine Account

add machine script = /usr/sbin/useradd -g machines \
                  -c "NT Machine Account" -d \
                  /dev/null -s /bin/false %m

To make sure that Samba can execute this script correctly, choose a Samba user with the required administrator permissions. To do so, select one user and add it to the ntadmin group. After that, all users belonging to this Linux group can be assigned Domain Admin status with the command:

net groupmap add ntgroup="Domain Admins" unixgroup=ntadmin

More information about this topic is provided in Chapter 12 of the Samba HOWTO Collection, found in: /usr/share/doc/packages/samba/Samba-HOWTO-Collection.pdf.

17.1.4. Installing Clients

Clients can only access the Samba server via TCP/IP. NetBEUI and NetBIOS via IPX cannot be used with Samba. Windows 9x and ME

Windows 9x and ME already have built-in support for TCP/IP. However, this is not installed as the default. To add TCP/IP, go to Control Panel -> System and choose Add -> Protocols -> TCP/IP from Microsoft. After rebooting your Windows machine, find the Samba server by double-clicking the desktop icon for the network environment.


To use a printer on the Samba server, install the standard or Apple-PostScript printer driver from the corresponding Windows version. It is best to link this to the Linux printer queue, which accepts Postscript as an input format.

17.1.5. Optimization

socket options is one possible optimization provided with the sample configuration that ships with your Samba version. Its default configuration refers to a local ethernet network. For additional information about socket options, refer to the section socket options in the manual pages of smb.conf and to the manual page of socket(7). Further information is provided in the Samba performance tuning chapter of the Samba HOWTO Collection.

The standard configuration in /etc/samba/smb.conf is designed to provide useful settings based on the default settings of the Samba team. However, a ready-to-use configuration is not possible, especially in view of the network configuration and the workgroup name. The commented sample configuration examples/smb.conf.SuSE contains information that is helpful for the adaption to local requirements.


The Samba HOWTO Collection provided by the Samba team includes a section about troubleshooting. In addition to that, Part V of the document provides a step-by-step guide to checking your configuration.