{
  "draft": "draft-ietf-pals-rfc4447bis-05",
  "doc_id": "RFC8077",
  "title": "Pseudowire Setup and Maintenance Using the Label Distribution Protocol (LDP)",
  "authors": [
    "L. Martini, Ed.",
    "G. Heron, Ed."
  ],
  "format": [
    "TEXT",
    "HTML"
  ],
  "page_count": "35",
  "pub_status": "INTERNET STANDARD",
  "status": "INTERNET STANDARD",
  "source": "Pseudowire And LDP-enabled Services",
  "abstract": "Layer 2 services (such as Frame Relay, Asynchronous Transfer Mode, and Ethernet) can be emulated over an MPLS backbone by encapsulating the Layer 2 Protocol Data Units (PDUs) and then transmitting them over pseudowires (PWs). It is also possible to use pseudowires to provide low-rate Time-Division Multiplexed and Synchronous Optical NETworking circuit emulation over an MPLS-enabled network. This document specifies a protocol for establishing and maintaining the pseudowires, using extensions to the Label Distribution Protocol (LDP). Procedures for encapsulating Layer 2 PDUs are specified in other documents.\n\n This document is a rewrite of RFC 4447 for publication as an Internet Standard.",
  "pub_date": "February 2017",
  "keywords": [],
  "obsoletes": [
    "RFC4447",
    "RFC6723"
  ],
  "obsoleted_by": [],
  "updates": [],
  "updated_by": [],
  "see_also": [],
  "doi": "10.17487/RFC8077",
  "errata_url": "https://www.rfc-editor.org/errata/rfc8077"
}