{
  "draft": "draft-ietf-mpls-tp-loss-delay-profile-04",
  "doc_id": "RFC6375",
  "title": "A Packet Loss and Delay Measurement Profile for MPLS-Based Transport Networks",
  "authors": [
    "D. Frost, Ed.",
    "S. Bryant, Ed."
  ],
  "format": [
    "TEXT",
    "HTML"
  ],
  "page_count": "5",
  "pub_status": "INFORMATIONAL",
  "status": "INFORMATIONAL",
  "source": "Multiprotocol Label Switching",
  "abstract": "Procedures and protocol mechanisms to enable efficient and accurate measurement of packet loss, delay, and throughput in MPLS networks are defined in RFC 6374.\n\n The MPLS Transport Profile (MPLS-TP) is the set of MPLS protocol functions applicable to the construction and operation of packet- switched transport networks.\n\n This document describes a profile of the general MPLS loss, delay, and throughput measurement techniques that suffices to meet the specific requirements of MPLS-TP.\n\n This document is a product of a joint Internet Engineering Task Force (IETF) / International Telecommunication Union Telecommunication Standardization Sector (ITU-T) effort to include an MPLS Transport Profile within the IETF MPLS and Pseudowire Emulation Edge-to-Edge (PWE3) architectures to support the capabilities and functionalities of a packet transport network as defined by the ITU-T. This document is not an Internet Standards Track specification; it is published for informational purposes.",
  "pub_date": "September 2011",
  "keywords": [],
  "obsoletes": [],
  "obsoleted_by": [],
  "updates": [],
  "updated_by": [],
  "see_also": [],
  "doi": "10.17487/RFC6375",
  "errata_url": null
}