{
  "draft": "draft-ietf-ccamp-mpls-tp-cp-framework-06",
  "doc_id": "RFC6373",
  "title": "MPLS Transport Profile (MPLS-TP) Control Plane Framework",
  "authors": [
    "L. Andersson, Ed.",
    "L. Berger, Ed.",
    "L. Fang, Ed.",
    "N. Bitar, Ed.",
    "E. Gray, Ed."
  ],
  "format": [
    "TEXT",
    "HTML"
  ],
  "page_count": "57",
  "pub_status": "INFORMATIONAL",
  "status": "INFORMATIONAL",
  "source": "Common Control and Measurement Plane",
  "abstract": "The MPLS Transport Profile (MPLS-TP) supports static provisioning of transport paths via a Network Management System (NMS) and dynamic provisioning of transport paths via a control plane. This document provides the framework for MPLS-TP dynamic provisioning and covers control-plane addressing, routing, path computation, signaling, traffic engineering, and path recovery. MPLS-TP uses GMPLS as the control plane for MPLS-TP Label Switched Paths (LSPs). MPLS-TP also uses the pseudowire (PW) control plane for pseudowires. Management-plane functions are out of scope of this document.\n\n This document is a product of a joint Internet Engineering Task Force (IETF) / International Telecommunication Union Telecommunication Standardization Sector (ITU-T) effort to include an MPLS Transport Profile within the IETF MPLS and Pseudowire Emulation Edge-to-Edge (PWE3) architectures to support the capabilities and functionalities of a packet transport network as defined by the ITU-T.\n\n This document is not an Internet Standards Track specification; it is published for informational purposes.",
  "pub_date": "September 2011",
  "keywords": [],
  "obsoletes": [],
  "obsoleted_by": [],
  "updates": [],
  "updated_by": [],
  "see_also": [],
  "doi": "10.17487/RFC6373",
  "errata_url": null
}