{
  "draft": "draft-ietf-behave-address-format-10",
  "doc_id": "RFC6052",
  "title": "IPv6 Addressing of IPv4/IPv6 Translators",
  "authors": [
    "C. Bao",
    "C. Huitema",
    "M. Bagnulo",
    "M. Boucadair",
    "X. Li"
  ],
  "format": [
    "TEXT",
    "HTML"
  ],
  "page_count": "18",
  "pub_status": "PROPOSED STANDARD",
  "status": "PROPOSED STANDARD",
  "source": "Behavior Engineering for Hindrance Avoidance",
  "abstract": "This document discusses the algorithmic translation of an IPv6 address to a corresponding IPv4 address, and vice versa, using only statically configured information.  It defines a well-known prefix for use in algorithmic translations, while allowing organizations to also use network-specific prefixes when appropriate.  Algorithmic translation is used in IPv4/IPv6 translators, as well as other types of proxies and gateways (e.g., for DNS) used in IPv4/IPv6 scenarios. [STANDARDS-TRACK]",
  "pub_date": "October 2010",
  "keywords": [
    "address",
    "prefix",
    "transition",
    "translation",
    "NAT",
    "NAT64",
    "BEHAVE",
    "stateless",
    "stateful"
  ],
  "obsoletes": [],
  "obsoleted_by": [],
  "updates": [
    "RFC4291"
  ],
  "updated_by": [],
  "see_also": [],
  "doi": "10.17487/RFC6052",
  "errata_url": "https://www.rfc-editor.org/errata/rfc6052"
}