| Red Hat Enterprise Linux AS 2.1: The Official Red Hat Enterprise Linux AS Installation Guide | ||
|---|---|---|
| Prev | Chapter 3. Installing Red Hat Enterprise Linux AS | Next |
What type of installation method do you wish to use? The following installation methods are available:
If you have a CD-ROM drive and the Red Hat Enterprise Linux AS CD-ROM, you can use this method. You will need a boot disk or a bootable CD-ROM. PCMCIA boot and driver disks may also be used. Continue reading this chapter for further instructions.
If you have copied the Red Hat Enterprise Linux AS ISO images to a local hard drive, you can use this method. You will need a boot disk. PCMCIA boot and driver disks may also be used. Refer to Chapter 4, for hard drive installation instructions.
If you are installing from an NFS server which is exporting the Red Hat Enterprise Linux AS CD-ROM(s) or a mirror image of Red Hat Linux, you can use this method. You will need a network boot disk. PCMCIA boot and driver disks may also be used. Refer to Chapter 4, for network installation instructions. Please note that NFS installations may also be performed in GUI mode.
If you are installing directly from an FTP server, use this method. You will need a network boot disk. PCMCIA boot and driver disks may also be used. Refer to Chapter 4, for FTP installation instructions.
If you are installing directly from an HTTP (Web) server, use this method. You will need a network boot disk. PCMCIA boot and driver disks may also be used. Refer to Chapter 4, for HTTP installation instructions.